Cifre Neutra Matte Floor Tile

In stock
Series : Neutra
Model : Neutra White
Item Number : 738300000007
Size : 30x60cm
Packaging : 6 pc/box
Special Price ₱230.00 Regular Price ₱328.57
/ PC
Loading...

Product Specification

SKU 738300000007
Weight (kgs) 22.200000
Application Indoor Floor
Brand Cifre
Edge Rectified
Finish Matte
Material Porcelain
Series Neutra
Unit of Measurement Pc
Size 30x60cm
Disclaimer Actual product color may vary from the images shown
Warranty Subjected to store's product warranty policy
Model Number Neutra White
Square Meter per Box 1.08 sqm
CIFRE 30X60CM NEUTRA WHITE PO MATE POR NR MATT WB

Also suitable for:

Indoor
Floor

Outdoor
Floor

Indoor
Wall

Outdoor
Wall

Countertop

Pool

Backsplash

Maintenance:

Use detergents or degreasers diluted in water for daily cleaning.

The following are the recommended steps for regular cleaning:

  1. Remove any solid or liquid residue from the surface using a soft broom or vacuum cleaner.
  2. Wipe off any liquid spillages as soon as possible.
  3. Dilute and apply the product according to the instructions.

Disclaimer:

  • The color and images of the series shown may vary from the actual item.
  • The products are subject to shade and variation.
  • Inspect the tiles before installation.
  • Wilcon Depot will not be liable for any items once disbursed.

Installation method:

  1. Check tile shading by laying out 4 to 5 boxes of tiles before installation.
  2. In tile installation, the following are the suggested adhesive type per tile size and type:

    1. Heavy duty tile adhesive for outdoor installation and large tile format (60cm x 60 cm and above).
    2. Regular tile adhesives are used for tiles below 60cm x 60cm in size.
    3. White heavy duty adhesives are for glass mosaic.

      **The use of ordinary cement in tile installation is discouraged. **
  3. Always have spacing between the lines. Minimum joint suggested for rectified tiles is 1.5 mm and 3.0 for non-rectified.
  4. Check and follow arrows or indicators on the back of each tile. Make sure all markings are facing one direction only.
  5. It is highly recommended to use the running bond layout at max. of 1/3 when installing planks or rectangular-sized tiles.