Cifre Opal Subway Wall Tile

In stock
Series : Opal
Model : Opal Grey
Item Number : 213000001377
Size : 7.5x30cm
Packaging : 22 pc/box
Special Price ₱1,055.98 Regular Price ₱1,508.54
/ BOX
Loading...

Product Specification

SKU 213000001377
Weight (kgs) 7.240000
Application Indoor Wall
Brand Cifre
Edge Non-Rectified
Finish Glossy
Material Ceramic
Series Opal
Unit of Measurement Box
Size 7.5x30cm
Disclaimer Actual product color may vary from the images shown
Warranty Subjected to store's product warranty policy
Model Number Opal Grey
Square Meter per Box 0.495 sqm
CIFRE 7.5X30CM OPAL GREY REV. NR GLOSSY WB

Also suitable for:

Indoor
Floor

Outdoor
Floor

Indoor
Wall

Outdoor
Wall

Countertop

Pool

Backsplash

Maintenance:

Use detergents or degreasers diluted in water for daily cleaning.

The following are the recommended steps for regular cleaning:

  1. Remove any solid or liquid residue from the surface using a soft broom or vacuum cleaner.
  2. Wipe off any liquid spillages as soon as possible.
  3. Dilute and apply the product according to the instructions.

Disclaimer:

  • The color and images of the series shown may vary from the actual item.
  • The products are subject to shade and variation.
  • Inspect the tiles before installation.
  • Wilcon Depot will not be liable for any items once disbursed.

Installation method:

  1. Check tile shading by laying out 4 to 5 boxes of tiles before installation.
  2. In tile installation, the following are the suggested adhesive type per tile size and type:

    1. Heavy duty tile adhesive for outdoor installation and large tile format (60cm x 60 cm and above).
    2. Regular tile adhesives are used for tiles below 60cm x 60cm in size.
    3. White heavy duty adhesives are for glass mosaic.

      **The use of ordinary cement in tile installation is discouraged. **
  3. Always have spacing between the lines. Minimum joint suggested for rectified tiles is 1.5 mm and 3.0 for non-rectified.
  4. Check and follow arrows or indicators on the back of each tile. Make sure all markings are facing one direction only.
  5. It is highly recommended to use the running bond layout at max. of 1/3 when installing planks or rectangular-sized tiles.