Roman Dartemis Wall Tile

In stock
Series : Dartemis
Model : W52310 Dartemis Beige
Item Number : 028500001073
Size : 25x50cm
Packaging : 8 pc/box
Special Price ₱1,000.00 Regular Price ₱1,250.00
/ BOX
Loading...

Product Specification

SKU 028500001073
Weight (kgs) 22.000000
Application Indoor Wall
Brand Roman
Edge Non-Rectified
Finish Matte
Material Ceramic
Series Dartemis
Unit of Measurement Box
Size 25x50cm
Disclaimer Actual product color may vary from the images shown
Warranty Subjected to store's product warranty policy
Model Number W52310 Dartemis Beige
Square Meter per Box 1 sqm
ROMAN 25X50CM W52310 D.ARTEMIS BEIGE -CER. GLOSSY NR RB

Also suitable for:

Indoor
Floor

Outdoor
Floor

Indoor
Wall

Outdoor
Wall

Countertop

Pool

Backsplash

Maintenance:

Use detergents or degreasers diluted in water for daily cleaning.

 

The following are the recommended steps for regular cleaning:

  1. Remove any solid or liquid residue from the surface using a soft broom or vacuum cleaner.
  2. Wipe off any liquid spillages as soon as possible.
  3. Dilute and apply the product according to the instructions.

Disclaimer:

  • The color and images of the series shown may vary from the actual item.
  • The products are subject to shade and variation.
  • Inspect the tiles before installation.
  • Wilcon Depot will be not liable for any items once disbursed.
  1. Check tile shading by laying out 4 to 5 boxes of tiles before installation.
  2. In tile installation, the following are the suggested adhesive type per tile size and type:
        

    Installation method:

    1. Heavy duty tile adhesive for outdoor installation and large tile format (60cm x 60 cm and above).
    2. Regular tile adhesives are used for tiles below 60cm x 60cm in size.
    3. White heavy duty adhesives are for glass mosaic.
      **The use of ordinary cement in tile installation is discouraged. **
  3. Always have spacing between the lines. Minimum joint suggested for rectified tiles is 1.5 mm and 3.0 for non-rectified.
  4. Check and follow arrows or indicators on the back of each tile. Make sure all markings are facing one direction only.
  5. It is highly recommended to use the running bond layout at max. of 1/3 when installing planks or rectangular-sized tiles.